Model Tech Yak 54 Bedienungsanleitung PDF herunterladen (Seite 50)

20. Iron the bottom covering to securely seal the

covering to the bottom of the rear canister tun-

nel former.

21. Dry fit the header and canister inside the tun-

nel and ensure there is clearance on all sides.

Canister Installation

1. Determine the location of the rear canister

mounting hanger. This should be approxi-

mately two thirds back on the canister or as

described in the canister installation instruc-

tions and as desired by the builder. Mark this

location on the edge of the canister tunnel.

2. Transfer this mark to the top of the canister

tunnel. Ensure the mounting holes in the top

of the canister tunnel will not interfere with

any equipment installed or to be installed in-

side the fuse.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Keine Kommentare

Model Tech Yak 54 Bedienungsanleitung Seite 50