Model Tech Yak 54 Bedienungsanleitung PDF herunterladen (Seite 19)

5. Mix epoxy in mixing cup and use a tapered

stick to apply the epoxy inside the pre-drilled

holes in the leading edge of the rudder. Apply

epoxy to trailing edge of each hinge.

6. Carefully slide the rudder onto each hinge and

against the trailing edge of the fin. Wipe away

excess epoxy with alcohol wetted wipes.

7. Ensure there is no gap between fin and rudder.

Rudder Servos Installation

1. Gather one rudder servo as shown below.

Recommended servo

180 in oz min torque - Metal geared - Digital

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

Keine Kommentare

Model Tech Yak 54 Bedienungsanleitung Seite 19