Model Tech Yak 54 Bedienungsanleitung PDF herunterladen (Seite 4)

Kit Contents:

Before you start the assembly of this model, check to make sure that there are no missing parts and

that none of the parts have been damaged during shipment. If you have any questions with the

assembly or flying of this model, please contact us and we will be happy to assist you. If you need

replacement parts please provide the model name. The parts included in the kit are shown on the

Part Sheet included with the kit.

Other items you may need that are not included with your kit:

Building Supplies:

In addition to the kit contents, we recommend having the following building supplies on hand to

complete the kit assembly in accordance with this manual.



Foam safe (odorless) CA



Foam safe CA “Kicker”



Thin CA



Gorilla glue



5 and 15 minute epoxy



Double back tape or spray adhesive



Low tack masking tape (blue painter’s tape)



Sanding block with 100 grit sandpaper



Sanding stick or emery board (150 grit)



Soldering iron and resin core solder



inch and 1/16 inch

diameter drill bits



Exacto knife with #11 blade



Utility knife



Small square



36 inch ruler



Needle nose pliers



inch diameter brass tubing



Diagonal cutting pliers

Power and Control Equipment:

The following items are needed to provide power and control function to your model.



Brushless outrunner motor with radial mount



4 motor mounting screws



Brushless motor speed control



4 micro servos (Hitec HS55 or equivalent)



3S Li-poly battery pack



LI-poly battery charger



4 or 6 channel micro receiver



Y harness if a 4 channel receiver is used



3 to 6 channel transmitter

1 2 3 4 5 6 7 8 9 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Model Tech Yak 54 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spielzeug & Zubehör Model Tech Yak 54